Image of Teaser

Oils, Lubricants and Fuels

Quality fuel specially formulated to keep your STIHL running strong

When you own a STIHL, you care about quality and demand the best performance. Keep...
When you own a STIHL, you care about quality and demand the best performance. Keep your 2-cycle engine in peak condition with a regular maintenance routine and premium-quality STIHL oils, premixed fuels and lubricants.

STIHL 2-cycle engine oils are specifically formulated for all STIHL chainsaws and offer outstanding engine cleaning and lubrication. A considerable amount of effort has been put into developing STIHL engine oil, bar and chain oil, and maintenance chemicals; they are designed to offer maximum protection under the most severe professional applications. They are also ideal for low-emission 2-cycle engines. 

Eliminate the hassle of mixing your own fuel mixture with STIHL MotoMix® premixed fuel. It’s clean, convenient and can be stored longer than fuel you mix on your own. STIHL MotoMix® is created with premium high-octane gasoline and the superior protection of STIHL HP Ultra Oil.
read more
  1. 5 years ago
    Jet Fuel for Chainsaws
    I purchased a MS362 last year. The only gas that has graced its tank has been Motomix. The stuff is SUPER expensive but the performance cant be denied. I take pride in my saw and don't mind spending the extra money while using only the finest products. Friends were skeptical while felling trees and getting whiffs of the Motomix exhaust, which kind of smells like fryer oil. Their questions diminished quickly once Motomix replaced their regular mix on our next gas up. Pricey but legit, Its like ... read more jet fuel for your chainsaw.
  2. 2 years ago
    Worth every penny
    If you're a casual user like myself, this product is worth every penny. You need super fresh fuel to run these machines, so unless you do lots and lots of work, the 1 gallon fuel can you pre-mix yourself will just sit there and go bad. Then, when you need the chainsaw, you'll be constantly fighting to get it to work right if at all and it is because of the bad fuel. Motomix has a 2 year shelf life after you open the can. I'm 100 percent sold on this product. It solved the problems I was having. ... read more Don't hesitate about the price. Buy it. You'll save yourself tons of hassle.
  3. 5 years ago
    Awesome When Used
    I agree with concensus that Motomix is great product but not cheap. If your an occasional user it is MUCH cheaper than service and frustration of neglected carburetor or the mortal sin of accidently straight gassing! I only use ethanol free fuel and Stihl Ultra Synthetic Oil when mixing my gas (my local Country Mark Fuel has an ethanol free pump). I still use Motomix in my small blower and trimmer that sip fuel. I also put in my chainsaws to store for summer. Home town fire department uses ... read more Motomix to insure easy start of saws when needed and preventing accidentally filling from straight gas can.
  1. 6 years ago
    Best Gas Can
    These cans seal tight and prevent moisture laden air from contaminating the ethanol in the fuel. I have had fuel with stabilizer added stay good for 8 months with no degradation. They are very easy to operate and they do not leak. I own 8-10 myself.
  2. 2 years ago
    This can is TOUGH!
    This can will withstand the wear & tear of working in the woods. The cap is a bit hard to remove because of the serrations on it that are designed to keep it from working loose, but a little practice makes it easier. The handles make it easy to dispense or carry. One should make certain they depressurize the contents prior to fueling. Pressurization can result due to exposure to heat. Failure to do so may cause a rapid, unwanted ejection of fuel. This may be accomplished by depressing the ... read more plunger briefly before tipping the can for fueling. I suggest an optional model marked or colored for TWO-CYCLE MIX.
  3. 3 years ago
    Best fuel container on the market hands down.
    I have purchased ten of these containers, 4 one and one quarter gallon, 4 of the five gallon and 2 of the two and one half gallon size. They work just as described. No spill I donated seven of these and kept a 1 1/4 and 2 fives for my self. On my fives I usually put in 3 to 4 gallons as it is easier to lift. and then as I empty one I can switch to the other one for my mower and pressure washer. I like the 1 1/4/. The small nozzle is just right for my chain saws, blower, edger and weedeater.
  1. 1 year ago
    Winter Bar & Chain Oil Will Flow When Your Coffee's Frozen !
    I use Winter Bar & Chain Oil in place of Platinum Bar & Chain Oil on the coldest of cutting days. The summer Oils will turn to molasses or jello at some point. The end result of that could be a "toasted" Bar! If you are still using Woodcutter Bar & Chain Oil, your switch-over to Winter Bar & Chain Oil should occur sooner as it thickens quicker than Platinum Bar & Chain Oil will at a given temperature. Remember, the newer Saws deliver less Oil to the Bar & Chain than the older models do, so ... read more your switch-over point may be more critical depending which Oil & Saw you have. Stihl, please color-code these Oils so we know what is in our Saw!!!
  2. 1 year ago
    For the really cold days
    I keep a quart around for the really cold days. In all honesty when the saw is warmed up I just run the Platinum Bar Lube and I haven’t had any issues. For the really really cold days this does flow better through the pump and onto the bar. It protects well but I switch when the temperature gets above 20F.
  1. 6 years ago
    healthier for me, lubes the saw well
    Unfortunately pricey. Any chainsaw sprays you with bar oil. I like the fact that I smell like french fries at the end of the day rather than petroleum. I would rather breath and bathe in vegetable oil than petrol. The oil washes out of your clothes easily with no residual smell in an ordinary wash. The saw seems to like it just fine. It seems to have a higher viscosity and it seems to use less, but I have not done a scientific side by side test with the regular bar lube. Hard to find product, ... read more dealers are not stocking it.
  2. 3 years ago
    Good product, avoid at low temperatures
    My boss bought this stuff for our crew because we go through 40 to 50 (or more) gallons of bar oil per work season and none of us liked the idea of spraying petroleum all over the forest. I also bought some for myself for other cutting jobs and I like it a lot. However, in temps lower than -15 F, it's too viscous and doesn't lubricate well. I switched back to regular cold weather oil after scorching the bar on my 362. It also smokes if your chain is dull and you're running the saw fast (had a ... read more coworker do this often)...cold weather oil does that too if run in warm air temps. However, in normal conditions it smells interesting, does a good job lubricating the saw, supposedly breaks down quickly, and landowners like the idea of it...good stuff!
  3. 3 years ago
    BBQ smoking wood
    I cut and use wood for BBQ smoking and always fret about using petroleum based bar oils in regards to health and taste. I've considered using vegetable oil but was not sure which oil to use and how it would perform in a chainsaw. Seeing as how Stihl has their brand on this stuff, I have no doubt that this is what I've been looking for.
  1. 1 year ago
    Platinum Bar Oil is a CUT-ABOVE the Rest !
    I was skeptical at first browse of this product. I thought, at the time, there was no good reason to swap from my many years of using Woodcutter Bar & Chain Oil. This is my first year using Platinum Bar & Chain Oil. What I have discovered is that it takes less overall quantity of this Oil to achieve the same level of lubrication provided by it's predecessor. Another benefit is this Oil is not as temperature-sensitive as the Woodcutter Bar & Chain Oil is. In other words, it will perform ... read more satisfactorily at somewhat lower temperatures before you ultimately need to switch over to Winter Bar & Chain Oil. It will take you some time to get used to having less visible Oil on your Chain, but the proof of proper lubrication is a cool-running Bar that isn't burning the paint off! However, if you have one of the newer Saws, be prepared to turn-up the Oil Quantity setting to near maximum level...even when using Platinum Bar & Chain Oil. I found the "E" setting on my new MS-362,461, & 661 to be too lean with 20", 25", & 32" Bars, respectively. So, I guess this means that the Woodcutter Bar & Chain Oil may be an unsatisfactory choice for proper lubrication on the newer Saws with lower-volume Oil Pumps & newer Bars with smaller Oil Delivery Holes.
  2. 1 year ago
    Excellent Product
    I have tried cheaper brands with poor results. This oil keeps the chain oiled and bar cooler.
  3. 3 months ago
    Great chain lube. Adhears great
    Keeps chain oiled well. Easy to pour. Great product.
  1. 2 years ago
    Take Care of your INVESTMENT!
    Look, Stihl power equipment deserves to be taken care of. This is especially important during break-in periods when friction & heat will be at their highest. Stihl will increase your product warranty when you purchase HP Ultra Oil in combination with your equipment purchase! Ask your dealer for details. I often wonder if I had been using this oil in my FS-550 a few years back...it wouldn't have seized up! Trust me, I do use it now in my MS-362, MS-661, BR-600, FS-460, & FS-560. That is way too ... read more much of an investment in equipment not to take care of. Friction performance is way better than standard 2-cycle mix.
  2. 4 years ago
    Best Option for Your Tools
    Originally purchased this oil to extend the warranty on a new chainsaw and became hooked to the quality operation of all my stihl engines. This stuff is superb and will make all your 2-cycle engines reach peak performance. My three stihl tools chainsaw (MS 271), trimmer (FS 130), and blower (BR 600), all burn this oil and I have found it to be superb. I switch to the pre-mixed product for my last run each fall/winter. Use this oil - you will not be disappointed.
  3. 7 years ago
    amazing response and cleanest burning oil you can buy
    I was talked into this mix when i purchased my MS311 chainsaw and was a little hesitant at first to even use the product but man was i fooled. Not only did it smell and look better it performed like no mix even had a chance against its clean burning powerhouse of a burn. Im an avid and well experinced landscaper. I use all types of two stroke tools hedge trimmers weedeaters chainsaws blowers concrete cutters. Using this mix has improved all my tools starting fuel consumption throttle response ... read more and over all power. Ill never use another mix again
  • 2019-12-08
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_17
  • loc_en_US, PRD
  • clientname_STIHL, pc_6, tc_6
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 32ms
  • SPOTLIGHTS, CATEGORY
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 31ms
  • SPOTLIGHTS, CATEGORY
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
My Preferred Dealer