TS 440 STIHL Cutquik®

Image of ts440
The powerful choice for limited access cuts.

Product Description

Versatile enough for general construction applications, but well suited for limited access cuts, the TS 440 represents the latest in professional cutting solutions from STIHL. The extended guard adjustment range of the TS 440 allows greater access in challenging cuts such as the bottom portions of walls, cutting in corners and cutting the underside of in-ground pipes. This expanded guard adjustability is made possible due to the sensor-activated STIHL Quickstop® wheel brake technology. The first cut-off machine in the world equipped with the technology capable of stopping the rotation of the cutting wheel in fractions of a second if kickback occurs.

Model Features

  • Reduced-Emission Engine Technology - Caring for Nature
    The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

    More information

  • Electronic Water Control (EWC)
    Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
  • X2 Air Filtration System
    The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
  • Anti-Vibration System
    STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • STIHL ElastoStart™
    The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • Ergonomic Grip
    The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
  • IntelliCarb™ Compensating Carburetor
    The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
  • Bayonet-Style Fuel Cap
    Includes retainer for easy use, even with gloves on.
  • Water Connection
    Water connection with shut-off valve and quick connector.
  • STIHL QuickStop™ Wheel Brake 
    Allows extended guard adjustability by reducing the risk of injury from kickback when the guard has been adjusted to expose the top portion of the wheel 
  • Wheel Guard 
    Extended wheel guard adjustability range increases utility of machine for certain cutting circumstance
  • Choke Lever and Purge Pump Primer 
    Conveniently located together for easier starting.

Specifications

DISPLACEMENT
66.7 cc (4.07 cu. in.)
ENGINE POWER
3.2 kW (4.4 bhp)
WEIGHT*
11.2 kg (24.7 lbs.)
FUEL TANK CAPACITY
710 cc (24 oz.)
ENGINE SPEED
9,000 rpm (Elec. Gov.)
MAXIMUM SPINDLE SPEED
2,525 rpm
ARBOR SIZE
20 mm
MAXIMUM WHEEL SIZE
350 mm (14 in.)
MAXIMUM CUTTING DEPTH
125 mm (4.9 in.)
POWER SOURCE
Gas
*Dry weight includes water attachment and guard. Shown with optional STIHL diamond wheel.

Important Information

WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.

Reviews

TS 440 STIHL Cutquik® is rated 3.0 out of 5 by 2.
Rated 1 out of 5 by from cant find blades You cant find 20mm Arbor 4.5mm metal blades for this makes it almost uselessRetailers have been useless
Date published: 2019-07-08
Rated 5 out of 5 by from Best 14” saw out there The saw is more powerful and runs better than any saw I’ve ever used. The electronic water control system is extremely convenient and can also be used with the portable Stihl pressurized tank. I wasn’t sure about the brake at first but while cutting a pipe the saw went to kick up and the brake instantly stopped the blade and kept the saw from kicking up making the saw safer than any other saw out there. I can’t say enough good things about this cut off saw!
Date published: 2018-10-26
  • y_2019, m_11, d_17, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.2
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_ts440, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_stihl

Standard Features

  • Common Features for Gasoline-Powered STIHL Cutquik® Cut-off Machines
    View the features common to many gasoline-powered STIHL Cutquik® Cut-off Machines.

We Also Suggest

For Your Safety

Support

Product Instruction Manual (PDF)
Product Safety Manual (PDF)
STIHL Limited Warranty
Contact Us

Share

My Preferred Dealer