cut-off-machinescut-off-machines
  1. 2 years ago
    Lightweight and great to operate
    Cuts great and very durable. Battery life is about 20 minutes and not a problem if you use the quick charge system.
  2. 5 months ago
    Great saw compact and lightweight
    This saw is good, lightweight and compact vs a gas powered. My boss (our mayor) has one he uses for his masonry business that we borrowed for our village to do some cutting on 4" ductile iron water line while replacing a fire hydrant. Saw had no clue what it was cutting and went through it very easy. Only thing to make this saw better would be a shroud that you can position to help get a change of angles for easier cutting approaches.
  3. 2 years ago
    its time to come out with a saw for rhe brick layers
    I've been a bricklayer for 35 years an when I seen this saw I thought to myself it's about time that they came out with this saw that's light and manageable to 2000 a wall it is very impressive but they need another inch on a saw blade very impressed but it doesn't cut through a brick if that ever is done I would buy it in a minute matter of fact I know 10 bricklayers that would buy it right away start thinking about tand I guarantee it your sales would increase 50%he bricklayers
  1. 3 years ago
    Great power
    I just picked up the ts-800 for a commercial job of mine,I had to cut 200 feet of concrete out. The power of the saw and the water attachment worked well! I suggest you buy the cart for the saw too.
  2. 2 weeks ago
    Product works great
    I am a plumber and I use this machine to cut through slabs to get to my drain lines. I have used other machines before. I rented for a while before I bought so I have a guideline for this review as well. This was a great purchase. I have had it for about four years. I have cut about 2000 feet with it and have not had any problems. My first time using it I had to learn a few things out so it took a little bit to get it started. Ever since then starting it is a breeze. This machine once you prime ... read more the carburetor starts on the second or third pull even after it has sat for months. I use ethanol free fuel just so you guys know. I love this machine. It is fun to use. The only reason I did not give it a full score on the power is because when you use a 16'' blade it will bog down in thick slabs. You just have to go a little bit slower and then it is fine. Other machines I have found could not come close to matching the power of this machine. I would recommend this to anyone. It is way better then renting and I bet if I where to sell this right now I could get close to what I paid for it. They hold there value. Also. I bought the wheels for the machine. I don't know why it doesn't come with the machine because it doesn't roll without them. It was a cheap add on anyway so it is not a big deal to buy. The wheels sit off the ground a little so when it is just sitting it is on its pads and doesn't roll or move when idling. Great Machine. It is one of my favorite tools in my business. You know what. Nevermind. It is my favorite.
  3. 4 years ago
    This saw is a power house
    Heavy saw but very powerful 16" blade will cut through anything
  1. 1 year ago
    Two thumbs up.
    This is a great tool. We wish we would have bought it years ago. Starts easy, runs great, has lots of power, blades last a long time. We are cutting a lot of 2 7/8 inch pipe and some 4 inch makes quick work of it. If you are thinking about one get one you will not be sorry.
  2. 7 months ago
    Well-made, durable cut-off saw for contractors
    We buy Stihl products exclusively because we know they will last a long time, and are easily repaired. Our men are not that easy on these things, another reason we go for the durability of Stihl.
  3. 1 year ago
    saws work well
    we have 8 ts400+7 ts420s i freshen them up in the winter all very good saws.the last one we got does not use a decompression valve! I question that. but i trust stihl.they are the best we can find
  1. 7 months ago
    I do believe the best value out there
    I have been using stihl products for over 30 + years. We have two ts 700 they are dependable smooth cuting tool.I have personaly went though over 100 + 14 inch concret cutting diamonds blades on one saw. In the past four years we have done general maintenance spark plugs air fliters and a occasional pull rope. ps. The ts 700 is very durable saw.
  2. 4 years ago
    The only saw I care to use
    I have ran all makes and sizes of saws over alot of years and if given a chance to chouse a saw this is the saw I took with me it cuts 50% faster than smaller saws and I like the handal All the way at the back you can get a lot of leverage with it there it also runs just as good upside down too also the drive belt is the best out there they run a long time with no matiance and never had it slip when using water they start good and idle vary well too if money was not a object this is the only saw ... read more I would have on my truck if you are out to make money this saw will save you time and money go and get yourself one and you won't regret it
  3. 4 years ago
    The Stihl TS700 is the best choice for all your cut-off saw needs, no matter how demanding.
    I typically use a cut-off saw to install vehicle loop detectors in asphalt and concrete driveways and roadways. In the past I have rented a Makita saw from a local rental agency. Much to my despair, this saw didn't have enough power to allow me to keep it in the material being cut very long at all. I would have to plunge the saw after holding down the trigger all the way and would only be able to cut a few inches at a time. This was very time consuming and very physically exhausting, especially ... read more on my back. A good friend of mine owns an older TS700 with a quick cart, and suggested I borrow his saw to see how I liked it. After completion of a job in literally 25% of the time it took with the rented saw with no pain, I was sold. The TS700 did not bog at all in the hot asphalt. Not only did I purchase a TS700 saw with a quick cart, but I also purchased a BG86 blower to keep the dust down while using the TS700. So now I have a Stihl chainsaw, weed trimmer, cut-off saw, and blower. Stihl products are definitely the way to go for professional grade tools with the the best performance and dependability in the industry. I'm sold!
  • 2017-04-26
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_12
  • loc_en_US, PRD
  • clientname_STIHL, pc_6, tc_4
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 31ms
  • SPOTLIGHTS, CATEGORY
My Servicing Dealer