Image of Teaser

Oils, Lubricants and Fuels

Quality fuel specially formulated to keep your STIHL running strong

When you own a STIHL, you care about quality and demand the best performance. Keep...
When you own a STIHL, you care about quality and demand the best performance. Keep your 2-cycle engine in peak condition with a regular maintenance routine and premium-quality STIHL oils, premixed fuels and lubricants.

STIHL 2-cycle engine oils are specifically formulated for all STIHL chainsaws and offer outstanding engine cleaning and lubrication. A considerable amount of effort has been put into developing STIHL engine oil, bar and chain oil, and maintenance chemicals; they are designed to offer maximum protection under the most severe professional applications. They are also ideal for low-emission 2-cycle engines. 

Eliminate the hassle of mixing your own fuel mixture with STIHL MotoMix® premixed fuel. It’s clean, convenient and can be stored longer than fuel you mix on your own. STIHL MotoMix® is created with premium high-octane gasoline and the superior protection of STIHL HP Ultra Oil.
read more
  1. 4 years ago
    Great for home owner
    I switched from mixed fuel to motomix this spring for my kombi trimmer and power sweep, I used only 3 cans from march 2015 to October 2015 so it was not that expensive for me to operate my equipment this season. I think it has excellent value for the home owner. For heavy use it might cost to much. Also I run this in my 20 year old homelite super 2 chainsaw and the performance over mixed fuel was very noticeable. It starts easier and much more power. Ill continue to use this product.
  2. 5 years ago
    Jet Fuel for Chainsaws
    I purchased a MS362 last year. The only gas that has graced its tank has been Motomix. The stuff is SUPER expensive but the performance cant be denied. I take pride in my saw and don't mind spending the extra money while using only the finest products. Friends were skeptical while felling trees and getting whiffs of the Motomix exhaust, which kind of smells like fryer oil. Their questions diminished quickly once Motomix replaced their regular mix on our next gas up. Pricey but legit, Its like ... read more jet fuel for your chainsaw.
  3. 4 years ago
    Awesome When Used
    I agree with concensus that Motomix is great product but not cheap. If your an occasional user it is MUCH cheaper than service and frustration of neglected carburetor or the mortal sin of accidently straight gassing! I only use ethanol free fuel and Stihl Ultra Synthetic Oil when mixing my gas (my local Country Mark Fuel has an ethanol free pump). I still use Motomix in my small blower and trimmer that sip fuel. I also put in my chainsaws to store for summer. Home town fire department uses ... read more Motomix to insure easy start of saws when needed and preventing accidentally filling from straight gas can.
  1. 3 years ago
    The only 2 cycle oil I use in my chainsaws and weedeater
    I use Stihl Performance Oil in all my tools - 009, 044, MS 660 and FS85 Pro and I have not had any motor issues, all still have great compression with very little smoke from the exhaust. The 009 and 044 are 15 years + old and both have had 1 spark plug change in all this time.I check the plugs every month, nice brown tint indicating a good burn of the fuel and oil. I have replaced bars and chains numerous times as these saws get worked every other week but the motors run like new. Very pleased ... read more with this oil......
  2. 2 years ago
    It passes the TEST of TIME!
    I started using this oil in 1981. I never substituted it's use for the duration I owned an 041AVES chainsaw. That saw ran from 1981-1998 for me. It was "Stihl" running strong when I sold it! The same applies to my 066 Magnum that I ran from 1998-2017. The compression on that engine was just like the day I bought it. It was in good enough shape to get half of what I paid for it back. I ran this oil in my FS-450K Brushcutter/Clearing Saw for over 3,000 hours. I sold that old unit to a professional ... read more Christmas Tree grower who ran it for another 6 or 7 years! (The projected life of that unit was 2,000 hours.) You just can't produce results like that unless the product is great. I did step-up to Stihl HP Ultra this year when I replaced my 066 Magnum with an MS-661 R-CM. It is now in my MS-362 C-M, BR-600, FS-460 C-EM K, & FS-560 C-EM. The bottom line is that I keep coming back to Stihl products & accessories because they keep getting better & better!
  3. 2 years ago
    My favorite 2 cycle oil
    This oil is excellent. My Stihl equipment runs so much better with this oil. I recommend this oil to anyone.
  1. 7 years ago
    good oil
    I started using this oil when it first came out, its the only oil that the local store sells, its not that much higher in price, over the lower grade of oil, the only thing I don't like about it is that it doesn'e have much color to the gas when mixed, whish Stihl would make it a darker color.
  2. 2 years ago
    Take Care of your INVESTMENT!
    Look, Stihl power equipment deserves to be taken care of. This is especially important during break-in periods when friction & heat will be at their highest. Stihl will increase your product warranty when you purchase HP Ultra Oil in combination with your equipment purchase! Ask your dealer for details. I often wonder if I had been using this oil in my FS-550 a few years back...it wouldn't have seized up! Trust me, I do use it now in my MS-362, MS-661, BR-600, FS-460, & FS-560. That is way too ... read more much of an investment in equipment not to take care of. Friction performance is way better than standard 2-cycle mix.
  3. 6 years ago
    The best there is.
    I've been using motor oils for years now on my RC plane gas engine and none got to the results this oil did. The engine is cleaner than ever, no carbon on the pistons, the spark plug is very clean but, wet, so the engine is NOT running lean, the exhaust ports are very clean like the day Ive got the engine, and I can tell you this after running more than 35 Gal with it . Before that I ran a different kind of oil, a premium style, that left a lot of carbon in the engine, the STIHL cleaned it all.
  1. 2 years ago
    This can is TOUGH!
    This can will withstand the wear & tear of working in the woods. The cap is a bit hard to remove because of the serrations on it that are designed to keep it from working loose, but a little practice makes it easier. The handles make it easy to dispense or carry. One should make certain they depressurize the contents prior to fueling. Pressurization can result due to exposure to heat. Failure to do so may cause a rapid, unwanted ejection of fuel. This may be accomplished by depressing the ... read more plunger briefly before tipping the can for fueling. I suggest an optional model marked or colored for TWO-CYCLE MIX.
  2. 6 years ago
    Chuck your other gas cans!
    A glowing review of a gas can? Yes sir! Other spill-mitigation systems can be cheap, difficult to use, and easy to break. I've gone through several. But this one? Push the button. No twisting cheap plastic rings into cheap plastic grooves and praying it doesn't break, no frustration at all actually, and I love the clear stripe that lets you see exactly how much gas is in the thing. It's a point-and-push operation.
  3. 6 years ago
    Best Gas Can
    These cans seal tight and prevent moisture laden air from contaminating the ethanol in the fuel. I have had fuel with stabilizer added stay good for 8 months with no degradation. They are very easy to operate and they do not leak. I own 8-10 myself.
  1. 1 year ago
    Excellent Product
    I have tried cheaper brands with poor results. This oil keeps the chain oiled and bar cooler.
  2. 1 year ago
    Platinum Bar Oil is a CUT-ABOVE the Rest !
    I was skeptical at first browse of this product. I thought, at the time, there was no good reason to swap from my many years of using Woodcutter Bar & Chain Oil. This is my first year using Platinum Bar & Chain Oil. What I have discovered is that it takes less overall quantity of this Oil to achieve the same level of lubrication provided by it's predecessor. Another benefit is this Oil is not as temperature-sensitive as the Woodcutter Bar & Chain Oil is. In other words, it will perform ... read more satisfactorily at somewhat lower temperatures before you ultimately need to switch over to Winter Bar & Chain Oil. It will take you some time to get used to having less visible Oil on your Chain, but the proof of proper lubrication is a cool-running Bar that isn't burning the paint off! However, if you have one of the newer Saws, be prepared to turn-up the Oil Quantity setting to near maximum level...even when using Platinum Bar & Chain Oil. I found the "E" setting on my new MS-362,461, & 661 to be too lean with 20", 25", & 32" Bars, respectively. So, I guess this means that the Woodcutter Bar & Chain Oil may be an unsatisfactory choice for proper lubrication on the newer Saws with lower-volume Oil Pumps & newer Bars with smaller Oil Delivery Holes.
  3. 1 year ago
    Platinum Protection for my Equipment
    I’m running this in all of my saws and it’s the best I’ve ever seen. It’s a clear color so pay attention when filling the tank, but the performance is top shelf! I’ve used it well below freezing and it flows just fine, especially when the Saw is good and warm. It protects in both the hot/humid weather and the cold. I do t use separate bar lines for cold weather any more. Just the platinum for all conditions! It does not clog up my tank or pump either. The tackiness is great and it stays in place ... read more very well even at high chain speeds. All in all it’s the best chain/bar Lube I’ve ever used and it’s well worth the modest cost difference.
  1. 1 year ago
    For the really cold days
    I keep a quart around for the really cold days. In all honesty when the saw is warmed up I just run the Platinum Bar Lube and I haven’t had any issues. For the really really cold days this does flow better through the pump and onto the bar. It protects well but I switch when the temperature gets above 20F.
  2. 1 year ago
    Winter Bar & Chain Oil Will Flow When Your Coffee's Frozen !
    I use Winter Bar & Chain Oil in place of Platinum Bar & Chain Oil on the coldest of cutting days. The summer Oils will turn to molasses or jello at some point. The end result of that could be a "toasted" Bar! If you are still using Woodcutter Bar & Chain Oil, your switch-over to Winter Bar & Chain Oil should occur sooner as it thickens quicker than Platinum Bar & Chain Oil will at a given temperature. Remember, the newer Saws deliver less Oil to the Bar & Chain than the older models do, so ... read more your switch-over point may be more critical depending which Oil & Saw you have. Stihl, please color-code these Oils so we know what is in our Saw!!!
  • 2019-10-21
  • bvseo_sps, prod_bvsp
  • cp_1
  • tr_17
  • loc_en_US, PRD
  • clientname_STIHL, pc_6, tc_6
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 47ms
  • SPOTLIGHTS, CATEGORY
  • bvseo_sdk, net_sdk, 2.3.0.0
  • CLOUD, getContent, 15ms
  • SPOTLIGHTS, CATEGORY
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
My Preferred Dealer